Wet-Look Gloss Sealer

For Indoor and Outdoor, Painted and Unpainted, Wood and Masonry Surfaces.

RainGuard Wet-Look is a film-forming water repellent that dries down to a clear, gloss finish that darkens and enhances the color of the surface to create a “wet look”. It is non-yellowing, low odor, low VOC, and non-toxic. Formulated to beautify the surface while still providing a tough, durable, water repellent finish, that resists flaking with excellent adhesion. Ideal for use on vertical/horizontal, painted/unpainted, interior/exterior surfaces such as: concrete, pavers, wood, brick, natural and artificial stone, unglazed tile, and masonry. Not for use on surfaces subject to hot tire traffic.

• Penetrating formula dries clear with a gloss finish
• Can be used alone or as a topcoat for paints and stains
• Prevents growth of mold and mildew
• 100% vapor permeable coating allows the surface to breathe
• UV stable formula will not yellow, crack, or peel over time

*Looking for a glossy finish suitable for hot tire traffic? Try Garage Floor Urethane Coating

What makes Wet-Look different? A water-based, modified silicone-acrylic formula makes it non-flammable, low odor, and safer for people, pets, and plants.

Where To Use

Perfect for interior or exterior, vertical or horizontal use on brick, concrete, pavers, stone, walls, fences, patios, decks, and any other porous masonry surfaces.

Coverage

Approx. up to 200 sq. ft. / gallon depending on surface porosity. (See TDS for details)

Number Of Coats

At least 2 flood coats are needed. Depending on surface porosity and desired look, additional coats may be needed. (2 coats = satin finish, 3 coats = high gloss finish)

Application Temperature

Between 40°F – 80°F

FAQ

>> Can I paint over Wet-Look at a later time?

Yes. You can paint over Wet-Look but keep in mind it will not protect the paint from moisture damage.

>> What product can I use on my driveway?

Although we don’t suggest using Wet-Look on any surface subject to hot tire traffic, you can use Garage Floor Sealer on your driveway.

Additional information

Wet-Look should be sprayed on with a hand-pump garden sprayer or applied with a short nap roller. Small areas (such as banisters) can be applied with a brush. Please read our Application Guide fully before starting your project: Wet-LookInstructions2020.pdf

Dry Time

Easy Clean Up

Simply use soap and water immediately after the application is completed. Be sure to clean any overspray on glass and decorative metals with a clean damp cloth.